9.45, 9.45i Treadmill
Page 33
Procedure 6.1 - Replacing the SCR (1L Units)
Diagrams 6.1 and 6.2, illustrate the components underneath the hood.
Removing the SCR
1. Remove the hood as described in Procedure 5.1 of the Residential Treadmill Service
Manual.
2. Disconnect the wires from the SCR terminals listed in Table 945-4.
Table 6.1 - SCR Electrical Connections
WIRE SCR TERMINAL...
Black wire -
Red wire +
Blue wires G1 and G2
Brown wire AC1
Blue wire AC2
3. Remove the screws that secure the SCR to the treadmill frame.
Diagram 6.1 - Parts Illustrations (1Y Units)
Drive Motor
Capacitor
Lower PCA
SCR
Inductor
To Next Page
Loading...
