Precor AMT 885 - Page 40

Error Codes
The following is a list of error codes and how to resolve the issue:
Error Codes
Action
Equipment
00-09, 11-16, 50 Turn the equipment off and on. Repeat twice. If the message still appears, contact
a Precor certified service technician.
AMT, elliptical, treadmill, RBK, UBK, and CLM
10, 20-23, 26-28, 32, LS,
ERR, E2, E4
Contact a Precor-certified service technician. AMT, elliptical, treadmill, RBK, UBK, and CLM
40, 42, 44-46 Logs error and displays code to user. User can continue the workout without
interruption.
AMT, elliptical, treadmill, RBK, UBK, and CLM
80-83 Turn the equipment off and on. Repeat twice. If the message still appears, contact
a Precor certified service technician.
AMT, elliptical, treadmill, RBK, UBK, and CLM
30, 31 Displays the error on the console to the user. Restart the equipment or reset the
E-STOP to use. Logs as a fatal error.
AMT, elliptical, treadmill, RBK, UBK, and CLM
62, 70-77 Contact a Precor certified service technician. AMT only
78 Display the message, "Belts must be changed soon", in place of the standard
banner text. Logs the error and allows the user to begin the workout. Contact a
Precor certified service technician.
AMT only
79 Displays the message, "Belts change required", in place of the standard banner
text. No workout can be started. Contact a Precor-certified service technician.
AMT only
17-20, 25, 85-88 Turn the equipment off and on. Repeat twice. If the message still appears, contact
a Precor certified service technician.
treadmill only
29 Displays the error on the console to the user and pauses the workout. The
treadmill speed MUST return to 0 before starting again. Logs the error.
treadmill only
33, 35-37, 60, 62 Displays the error on the console to the user. Restart the equipment or reset the
E-STOP to use. Logs as a fatal error.
treadmill only
5