Need help?Do you have a question about the Precor AMT 885 and is the answer not in the manual?
General| Resistance Levels | 20 |
|---|---|
| Weight Capacity | 350 lbs |
| Power Requirements | Powered |
| Heart Rate Monitoring | Touch and telemetry |
| Console Type | P82 touchscreen console |
Step-by-step guide for replacing the main control board in the console.
Steps for updating or reprogramming the console's upper PCA software.
Diagnosing issues related to console buttons and the main upper PCA.
Steps to diagnose and resolve problems with the heart rate monitoring system.
Troubleshooting steps for when the console's upper display fails to light up.
Instructions on how to update the P80 console's software via a USB flash drive.
Performing diagnostic tests to check specific equipment functions.
Procedure for saving and importing console settings via a USB flash drive.
Step-by-step instructions for removing and installing the P80 console.
Troubleshooting steps for when TV channels display black screen with no audio.
Diagnosing issues when the entire console displays only a black screen.
Steps to resolve when the entire touch screen displays green and is unresponsive.
Diagnosing and fixing when the touch screen does not respond to input.
Diagnosing when machine controls do not respond to user input.
Troubleshooting when machine controls function incorrectly (e.g., speed up makes speed go down).
Resolving the "Temporarily Out of Service" message on the console.
Steps to resolve the "Please Reset the Treadmill" message.
Troubleshooting when the console reboots unexpectedly without input.
Steps to inspect and adjust the tension of the H-brake belt.
Procedure to inspect and adjust the generator belt tension.
Steps for inspecting and adjusting the drive input belt tension.
Procedure to calibrate the incline motor for accurate movement.
Diagnostic steps for issues related to the AMT's generator.
Procedures for diagnosing and resolving problems with the incline system.
Steps to diagnose issues with the cable connecting the upper and lower PCA.
Steps for replacing all four flat belts in the system.
Instructions for replacing the lower board component.
To Next Page
