C944 Treadmill
Page 10
Changing the Measurement Standard
5. With the PRECOR C944 banner scrolling, press the SPEED ▲ and QUICK START/
CHANGE keys
simultaneously or keys RESET,5,6,5,1,5,6,5, sequentially on units with
standard access codes. A message indicating the last selected units (either U. S.
STANDARD UNITS or METRIC UNITS) scrolls across the display.
6. Use the SPEED or INCLINE keys to select the alternate measurement standard.
Note:
Holding the INCLINE UP and CHANGE keys at the banner may cause the last selected units to
change if the INCLINE UP key is released before the CHANGE key.
Selecting Maximum Workout Speed
For PWM treadmills, the maximum workout speed limit is between either 1 and 12 MPH or 1 and
20 KPH. Maximum workout speed limits for SCR C944 treadmills range between 1 and 10 MPH
or 1 and 16 KPH.
7. With the last currently selected maximum speed displayed on the L.E.D. matrix, use the
SPEED or INCLINE keys to designate a workout speed limit. Press ENTER when the
desired speed appears.
Selecting Maximum Workout Time
8. With the last currently selected maximum time displayed on the L.E.D. matrix, use the
SPEED or INCLINE keys to designate a workout time limit. Press ENTER when the desired
time appears.
To Next Page
Loading...
Need help?
General
