Why none of the keys on my Precor C932i Treadmill display are functioning?
If none of the keys on the display are functioning, the stop switch may not be connected or functioning correctly. Check the stop switch cable connection to the upper PCA.
What to do if a particular key is not functioning on my Precor C932i?
If a particular key is not functioning, replace the display face.
What to do if 5 Vdc is not present on J1 and 8 Vdc is present on J4 on Precor Treadmill?
If 5 Vdc is not present on J1 and 8 Vdc is present on J4, replace the upper PCA.
What to do if 8 Vdc is not present on J4 on Precor C932i?
If 8 Vdc is not present on J4, temporarily replace the upper PCA to power control module with a known good cable.
What to do if the same key is still not functioning after replacing the display face on my Precor C932i Treadmill?
If the same key is still not functioning after replacing the display face, replace the upper PCA.
Power| motor power | 2.75 hp |
|---|---|
| power supply | 120 VAC (50/60Hz) |
| current | 15 Amps |
Performance| speed range | 0.5 - 11 mph (1 - 18 kph) |
|---|---|
| incline range | 0 - 15% grade |
Weight and Dimensions| length | 79 in (201 cm) |
|---|---|
| width | 34 in (84 cm) |
| height | 55 in (140 cm) |
| weight | 280 lbs (126 kg) |
| shipping weight | 320 lbs (144 kg) |
| belt dimensions | 57 in x 20 in (145 cm x 51 cm) |
Confirms the treadmill meets safety standards and specific certifications.
Explains the importance and procedure for grounding the treadmill to prevent electrical shock.
Information regarding RFI compliance for various regions like FCC and Canadian standards.
Details European Council Directives and tested standards for electromagnetic compatibility.
Provides contact information and procedures for getting technical support or service.
Explains manual conventions, symbols, and how to interpret information.
Steps and considerations for safely unpacking the treadmill and its components.
Lists and describes components in the hardware kit and tools required for assembly.
Covers installation requirements and step-by-step assembly instructions for the treadmill.
Procedure to check and ensure the running belt is properly centered for optimal operation.
Customization options for club use and general programming tips for treadmill settings.
Overview of the console, its features, setup modes, and display readouts.
Overview of keypad functions, tips, special functions, and individual key descriptions.
General guide to using the treadmill for workouts, including quick steps.
Key safety aspects like security clip, handrails, and stop button usage.
Overview, features, and detailed descriptions of available workout programs.
How to use Heart Rate and SmartRate® features, including target zones.
Daily checks for wear and tear, and procedures for cleaning the treadmill components.
Steps to adjust and center the running belt for optimal operation and longevity.
Guidance on servicing, storing the chest strap, and long-term storage of the treadmill.
Terms, conditions, coverage periods, and restrictions of the treadmill's limited warranty.
Key physical, electronic specifications, features, and display readouts of the treadmill.
To Next Page
