page 36
COMMERCIAL PRODUCTS DIVISION
Once the C932i is set up, it is ready to use. The easy-to-understand prompts let
the user select a program and specify how long he or she wishes to work out. The
speed and incline levels can be adapted to meet their fitness goals.
Important: Club owners, managers, and personal trainers. Remind users
how important it is to use the treadmill’s safety features and security clip while
working out on the treadmill. Instruct them on how to attach the security clip to
their clothing near their waistline. If any complications occur, a strong tug on the
security cord or a quick tap on the STOP key will stop the running belt.
Note: This section of the manual is written for the user because it specifically
explains how to work out on the treadmill. References are made in second person.
Information presented in this section includes:
• Using the safety features • Quick steps to working out
• Reviewing keypad and workout tips • Cooling down, pause and exiting features
CAUTION: Do not allow children on or near the treadmill. If anything should
get caught in the rollers, the running belt does not stop immediately.
SAFETY FEATURES
The C932i treadmill is a powerful machine. Safety aspects to consider include:
• Always hold onto the handrail whenever you step on to or off of the treadmill.
• Always attach the security clip to your clothing prior to working out.
• Prior to the start of a program, the display will return to the PRECOR banner
if more than two minutes elapse without a key press occurring.
USING THE SECURITY CLIP
A security clip is attached, by its cord, to the red STOP button that straddles the
handrail.
Always attach the security clip to your clothing before each workout.
A tug on the cord trips the security switch and slows the running belt to a stop. If the
security switch trips while you are working out, the treadmill retains your workout
statistics and enters Pause mode. To resume your workout, reattach the security clip
to your clothing, and press the SPEED ▲ key until you reach the desired speed.
USING THE HANDRAILS
Always grasp the handrails to help keep your balance when stepping on to or off
of the treadmill and when you press the display keys.
CAUTION: When you press the QUICKSTART key, keep in mind that the running
belt begins moving automatically at 1.0 mph or 1.5 kph following the scrolling
prompt: BELT STARTING 3, 2, 1… Other programs, such as the Interval (INTV)
program have user-defined speeds. Prior to a change in speed, a three-minute
warning scrolls across the display. Always grasp a handrail when the running
belt changes speeds. Do not let go until you are comfortable with the running
belt speed.
Exercising on the C932i
To Next Page
Loading...
Need help?
Power
Performance
Weight and Dimensions
