C944 Treadmill
Page 8
Procedure 2.2 - Displaying the Treadmill Odometer
This procedure displays total distance (in miles or kilometers) the treadmill has operated. The
odometer cannot be reset.
Note:
The odometers get updated at the end of the course. If a user shuts off the unit while in the
middle of a course, the odometer will not be updated and the user will have essentially lost the
mileage for that session. Pressing RESET displays the PRECOR C944 banner and accumulates
the mileage.
Procedure
1. Plug the power cord into the wall outlet, then turn on the treadmill with the circuit breaker.
2. With the PRECOR C944 banner scrolling, press the INCLINE
▲ and SPEED ▲ keys
simultaneously or keys RESET,6,5, sequentially on units with standard access codes.
Note:
The right display window displays total miles or kilometers on the treadmill (see
Diagram 2.2). The top display window shows the most significant bits of the number; the lower
display window shows the least significant bits of the number. The number displayed is
102,187,723 (in miles or kilometers).
3. Press ENTER to return to the PRECOR C944 banner.
Diagram 2.2. - Odometer Display
000
1
021
8
7
72
3
To Next Page
Loading...
Need help?
General
