Precor C954i User Manual

page 30
COMMERCIAL PRODUCTS DIVISION
Numeric Keys (1 - 0): During a workout, you can use the numeric keys to change
the treadmill’s speed or incline (in whole numbers or increments). The range of
speed (0.5 - 12 mph, 1 - 20 kph) can be set by the club, so there may be limits.
Check with the club manager. Remember, if you use the numeric keys to change
the speed or incline, you need to designate which function you are changing by
pressing the SPEED ▼ or ▲ key (or the INCLINE ▲ or ▼ key) within 3 seconds.
Note: When you use the numeric keys to change the incline, the actual incline
appears on the display as the lift moves toward the target position. If you wish to halt
the lift’s movement, press either the INCLINE ▲ or ▼ key. The lift stops moving and
the display shows the current incline level. A similar situation occurs when you use
the numeric keys to change the speed, only it’s the running belt that is being
affected.
During the Setup prompts, you can also use the numeric keys to type in a
program number, workout time, “goal” entry, and age. Note that you must press
ENTER to process your selection.
CHANGE: During a workout, the CHANGE key lets you choose which feature
appears on the display.
RESET: While you are answering the Setup prompts or when the running belt is
stopped, you can cancel the program, clear the display, and return to the banner
by pressing RESET.
INCLINE
▲▼▲▼
▲▼▲▼
▲▼: During a workout, the INCLINE ▲▼ keys let you increase or
decrease the running bed’s incline. The incline changes can range from 0% to 15%
in 0.5% increments. The incline in some programs (Custom, Random and Interval)
is preset, but can be overridden by the user. An exception to these rules are the
Heart Rate and Weight Loss programs.
When you press the INCLINE ▲▼ keys, the number that appears on the display
shows the target incline (not the actual incline) because the display can change
much faster than the motor driven lift.
Another feature of the INCLINE ▲▼ keys lets you review the treadmill’s incline
any time during your workout. If incline is not one of the chosen features being dis-
played, you can view the actual incline by lightly touching either INCLINE ▲ or ▼ key.
You can opt to change the incline, if you hold the key down for more than
2 seconds.
Note: The numeric keys can also be used to adjust the incline. Please refer to
Numeric Keys above.
Important: In the Heart Rate and Weight Loss programs, the INCLINE ▲▼ keys
affect the target heart rate, not the treadmill’s incline.
STOP: When the STOP button is pressed, the running belt slows to a gradual
stop. The treadmill remains in pause mode. If the lift was moving when the STOP
button was pressed, the lift stops also and remains at its current incline level.
To resume a workout, the SPEED ▲ must be pressed. If no key press is detected and
the pause time limit elapses, the display returns to the Precor banner. A default time
limit of 2 minutes exists or a “pause time limit” can be set by the club, refer to Club
Information on page 21.

Precor C954i Specifications