C954, C956 Treadmill
20077-107 Page 45
Procedure 6.5 - Replacing the Fan Sense PCA
Note:
The fan sense function was discontinued on 9/29/2000. If a fan alarm is (error 13) being initiated,
replace the lower logic PCA software (Prom) with version 1.03 or higher. Replacing the software
will disable the fan sense function.
Should a fan sense PCA fail, it should be removed and not replaced after the lower PCA software
has been replaced with version 1.03 or higher.
To Next Page
Loading...
Need help?
General
