C954, C956 Treadmill
20077-107 Page 9
Procedure 2.3 - Selecting Club Settings
This procedure allows you to change the following club settings:
• Language
• Measurement Units
• Maximum Speed
• Maximum Workout Time
• Maximum Pause Time
• Cool Down Time (version 3, only)
• Modify Custom Courses
Procedure
1. Plug the power cord into the wall outlet, then turn on the treadmill with the circuit breaker.
2. With the banner scrolling, press keys RESET,5,6,5,1,5,6,5, sequentially.
Selecting Language
3. The prompt SELECT LANGUAGE will be displayed. The currently selected language will
then be displayed.
4. Use the , keys to scroll through the available languages.
5. Press the ENTER key to select the currently displayed language or the STOP key to leave
the original language selected.
Select Measurement Units
6. The prompt SELECT UNITS will be displayed. The currently selected measurement unit will
then be displayed.
7. Use the , keys to scroll through the available measurement units.
8. Press the ENTER key to select the currently displayed measurement unit or the STOP key
to leave the original measurement unit selected.
Select Maximum Speed
9. The prompt SET MAX SPEED will be displayed. The currently selected maximum speed will
then be displayed in either MPH or KPH depending upon the measurement units selected.
10. Use the , keys to scroll through the possible range of maximum speeds.
To Next Page
Loading...
