EasyManua.ls Logo

Precor CLM 835 - User Manual

Precor CLM 835
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
©2011 Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law Page1

Other manuals for Precor CLM 835

Question and Answer IconNeed help?

Do you have a question about the Precor CLM 835 and is the answer not in the manual?

Precor CLM 835 Specifications

General IconGeneral
Resistance Levels20
Max User Weight350 lbs
Stride RateUp to 180 strides per minute
Console TypeTouchscreen
Heart Rate MonitoringContact and wireless telemetry
Power120V
TypeElliptical Trainer

Summary

Section One - Things you Should Know

Warning and Caution Statements and General Safety Guidelines

Crucial safety information and warnings for operating and servicing the unit.

Section Five - P30 Console - CLM

Procedure 5.1 - P30 - Accessing the Diagnostic Software

Details steps to enter and navigate the console's diagnostic software modes.

Procedure 5.5 - P30 - Replacing Upper PCA

Step-by-step instructions for replacing the upper Printed Circuit Assembly.

Procedure 5.6 - P30 - Replacing Metric PCA

Detailed guide for replacing the Metric Printed Circuit Assembly.

Troubleshooting 5.11 - P30 - Troubleshooting the Keypad and the Upper PCA

Diagnoses common issues with the keypad and upper PCA, providing solutions.

Troubleshooting 5.12 - P30 - Troubleshooting Handheld Heart Rate

Addresses problems related to handheld heart rate monitoring system functionality.

Troubleshooting 5.13 - Upper Display does not Illuminate

Provides steps to diagnose and fix issues where the upper display fails to light up.

Section Seven - Checking CLM Operation

Section Eight - Inspection and Adjustment Procedures

Procedure 8.1 - Preventive Maintenance

Details scheduled and unscheduled maintenance tasks for optimal performance and longevity.

Section Nine - CLM Troubleshooting Procedures

Troubleshooting 9.1 - Troubleshooting the Lower and Upper Data Cables and Mid-Point Connector

Diagnoses issues with data communication between console components.

Troubleshooting 9.2 - No Resistance

Addresses problems where the climber fails to provide resistance during operation.

Section Ten - Replacement Procedures

Procedure 10.3 - Replacing the Lower PCA

Step-by-step guide for replacing the lower Printed Circuit Assembly.

Procedure 10.15 - Replacing a Generator

Comprehensive guide for replacing the generator unit.

Section Fourteen - Wiring Diagram

Related product manuals