Precor move beyond S3.25 User Manual

Assembly and Maintenance Guide
S3.25
Strength-Training
Fitness Equipment

Precor move beyond S3.25 Specifications

General

Resistance Levels	16
Display	LCD
Power Requirements	120V
Type	Elliptical
Weight Capacity	350 lbs

Summary

Important Safety Instructions

Personal Safety During Assembly

Safety precautions for assembly personnel, including the need for assistance and careful reading of instructions.

Obtaining Service

Guidance on how to get technical support or repair services for the equipment from authorized dealers or Precor.

Before You Begin

Unpacking the Equipment

Instructions for safely opening boxes and handling components, emphasizing careful unpacking and sequence adherence.

Optional Equipment

Information on additional equipment like the 250-lb Weight Stack and Leg Press that can be purchased.

Preparations for Assembly

Required Tools

List of specific tools that must be obtained before beginning the assembly process.

Installation Requirements

Conditions for setting up the equipment, such as a solid flat surface, ample space, and proper bolt insertion.

Assembly Tips

Helpful advice and guidelines for a smooth assembly process, including reading cautions and using the scale.

Open Box 1

Step 1. Attach Rear Upright to Main Upright

Step 2. Attach Chest Press Base

Open Box 2

Step 3. Assemble Leg Curl Seat Extension

Step 4. Attach Rotating Arm and Handles

Step 5. Attach Roller Pads

Step 6. Assemble Leg Curl Seat

Open Box 3

Step 7. Assemble Chest Press Seat

Step 8. Attach Press Arm Assembly

Step 9. Attach Handlebars

Step 10. Assemble Chest Press Seat

Open Box 4

Step 11. Assemble Weight Stack

Step 12. Feed Upper Cable

Step 13. Attach Lat Bar Holders

Step 14. Feed Cable From Cable Tree

Step 15. Attach Leg Curl Cables to Lower Pulley Bracket

Step 16. Attach Leg Curl Cables to Seat Upright

Step 17. Feed Top Cable 44376-102

Step 18. Feed Bottom Cable 44375-103

Step 19. Attach Surgical Tubing to Top Beam

Step 20. Attach Leg Curl Cables to Cable Tree

Step 21. Attach Accessories

Step 22. Attach Shrouds

Adjustments and Maintenance

Cable Adjustments

Procedure for checking and adjusting cable tension for optimal performance and to prevent damage.

Selector Stem Adjustments

Forward Angle Adjustment

How to adjust the selector stem angle to prevent contact with weight plates during use.

Backward Angle Adjustment

Side-to-Side Vertical Adjustment

Maintenance

Routine lubrication of guide rods every six months for smooth operation.

Precor Residential Equipment Limited Warranty

Limited Warranty

Warranty Periods and Coverage

Conditions and Restrictions

Disclaimer and Release

Exclusive Remedies

Exclusion of Consequential and Incidental Damages

S3.25 Specifications