Precor move beyond S3.25 - Step 2. Attach Chest Press Base

S3.25 Assembly and Maintenance Guide
page 10
1 2 3 4 5 6
2. Attach Chest Press Base
A. Attach the Chest Press Base to the Main Upright
using
one 3¼-inch bolt
two washers
one locknut
Finger tighten.
B. Attach the Floor Base to the Chest Press Base
using
two 3-inch bolts
four washers
two locknuts
Finger tighten.
If any parts remain, set them to the side for future
steps.
Step 2. Attach Chest Press Base
1 - 3¼" bolt
2 - washers
1 - locknut
A
Main Upright Base
Chest Press Base
Main Upright
B
2 - 3" bolts
4 - washers
2 - locknuts
Floor Base