Need help?Do you have a question about the Precor move beyond S3.19 and is the answer not in the manual?
Weight and Dimensions| length | 77 inches (196 cm) |
|---|---|
| height | 83 inches (211 cm) |
| width | 58 inches (147 cm) |
| width with leg press option | 97 inches (147 cm) |
| shipping weight | 418 lb (168.5 kg) |
Essential safety precautions for users during the assembly process.
Guidance on how to get assistance or service for the equipment.
Instructions on how to carefully unpack the fitness equipment components.
Information about available optional attachments for the fitness equipment.
List of tools needed for the assembly of the fitness equipment.
Key requirements for proper installation and setup of the equipment.
Helpful advice and best practices for a smooth assembly process.
Steps to unpack and identify components from the shipping boxes.
Detailed instructions for assembling the primary frame of the equipment.
Guide for attaching and assembling the leg extension component.
Instructions for installing rollers and seat cushions on the equipment.
Steps for assembling the weight stack mechanism.
Instructions for attaching and assembling the press arm assembly.
Guide for installing the high-to-low pulley system.
Detailed steps for routing and installing the lat pulley cable.
Guide for routing and installing the leg extension cable.
Instructions for connecting the cable for the leg press option.
Steps for installing mid pulley cable and connecting to Hi/Lo pulley.
Instructions for attaching the protective shrouds to the equipment.
Guide for attaching various exercise accessories.
Instructions on how to adjust the position of the Hi/Lo pulley.
Steps for applying weight labels and lubricating parts.
Procedures for checking and adjusting cable tension for optimal performance.
Detailed steps for making fine adjustments to cable slack and alignment.
How to adjust the selector stem for proper weight selection.
Routine maintenance tasks for guide rods and general inspection.
To Next Page