Precor move beyond S3.19 User Manual

S3.19 Assembly and Maintenance Guide
page 31
1 2 3 4 5 6
4
Cable Adjustments
and Maintenance
Cable Adjustments and Maintenance
When the S3.19 is completely assembled, you need to
check the cables for proper tension. Obvious signs that
cable problems exist include:
✔ Top Cap Weight does not rest squarely on the top
weight of the Weight Stack.
✔ Cables rub the inside edges of the pulleys.
✔ Excess slack exists in the cables.
✔ Weight Pin cannot be easily inserted in or removed
from each hole in the Weight Stack.
✔ Selector Stem rubs inside the Weight Stack.
CAUTION: Take the time to perform the following
steps. If the cables do not have the proper tension
you could void the Precor Limited Warranty.
Important: To access the cables attached to the
Selector Stem and two Floating Pulleys, you will need
to remove the shrouds.

Precor move beyond S3.19 Specifications

Weight and Dimensions

length	77 inches (196 cm)
height	83 inches (211 cm)
width	58 inches (147 cm)
width with leg press option	97 inches (147 cm)
shipping weight	418 lb (168.5 kg)