Precor Console User Manual

Error Log
Quick access to the informational display is available if error
messages have appeared on the display and have been recorded
in the error log. This feature is usually reserved for service
personnel. At the Precor banner, press and hold RESET for 4
seconds. If DIAGS - INFORMATION DISPLAY or ERROR LOG
appears, press OK.
If no errors are logged, STOP KEY or STUCK KEY appears.
When you release the key, the Precor banner returns.
Note: On treadmills, the red STOP button can be used instead of
the PAUSE/RESET key.
Erasing the Error Log
When you no longer need the error log information, you may erase
all entries in the error log by pressing the QUICKSTART key while
any error description is scrolling across the display. Continue to
maintain light pressure on the key until the message, HOLD TO
CLEAR ERRORS
, scrolls off the display. When the key is
released, NO ERRORS appears on the display, which indicates the
error log has been deleted.
Important: You cannot retrieve the error log once you have deleted
it. You may want to resolve any issues you are experiencing with
the equipment before erasing the error log.
When you are ready, press RESET to return to the Precor banner.
Product Owner's Manual: Club Features 31

Precor Console Specifications

General

Brand	Precor
Model	Console
Category	Fitness Electronics
Language	English