General Safety and Maintenance Manual: Daily Inspection 10
Precor products come equipped with a number of standard warning
labels. The following figures show sample warning labels you may see
on the equipment depending on the model:
Figure 4: This warning label may appear on weight stacks with a pulley
mounted at the top
Figure 5: This warning label may appear on or near weight stacks where
a cable bolt is threaded into the selector stem
Figure 6: A version of this warning label appears on the equipment frame
KEEP HANDS AND FEET CLEAR WHILE MACHINE IS IN USE
The weight stack cable bolt must be
inserted a minimum of seven full turns
into the selector stem, and the jam nut
tightened down firmly against the
selector stem top.
To Next Page
Loading...
