General Safety and Maintenance Manual: Daily Inspection 9
Figure 2: Cable bolt must have a minimum of seven threads into
selector stem
Check Warning Labels and Instruction
Placards
Inspect warning labels and Instruction placards daily to ensure that all
the information can be clearly read. If any portion is not visible, replace
that label or placard immediately (refer to Obtaining Service to
purchase them).
Clean labels and placards as needed with a mild soap and water
solution in a spray bottle, and dry thoroughly with a soft cloth.
Figure 3 shows a typical user instruction placard.
Figure 3: Sample user instruction placard
Cable bolt must be inserted a
minimum of 7 threads into the
selector stem.
Locking jam nut
Improper use of this machine will result in injury.
Before using, consult a qualified instructor.
Inspect cables and connections and do not use
if any component is worn or damaged.
CAUTION
PULLDOWN 304
Select appropriate lifting weight.
Adjust thigh pad to rest securely
on top of legs.
Grip bar with hands evenly spaced.
Pull bar down to upper chest
with a slow, controlled movement,
pulling handles behind neck is
not recommended, as injuries
could result.
Slowly return to the start position.
To Next Page
Loading...
