38 Operating and Maintaining the P80 Console
To clear the Channel Guide completely:
1. On the Channel Guide screen, touch Delete All.
2. When asked "Delete All Channels?", verify that you want
to proceed, then touch Delete All again.
Table 7. TV Settings
Settings Detail Default
Channel Guide Use to scan basic channels
Region Select the appropriate region for your
location.
United
States
Default Channel Set a default channel for the
equipment. This is the channel that
will display when the TV is turned on.
Volume
Correction
Allows for volume adjustment of
analog channels to match digital
channels
0
Skip Unnamed
Channels
Use to screen out channels that are
not valid or encrypted.
On
Extensive Scan Run to identify analog channels
missed by the basic scan or channels
with weak signals. Takes up to two
hours to complete.
Off
Closed Captioning Select ON if you want closed
captioning to appear on your TV
screen.
On
Export/Import
Channel Names
Import the channel names once a
basic channel scan is complete.
Blank
Editing the Export/Import Channel File
Note: You will need to scan for channels before you can
export the file. If you have not scanned for channels, refer to
Channel Configurations in the preceding section.
Exporting the channel list from the fitness equipment creates
a file called channel-guide.json. This file can be used to specify
channel names in languages that are not yet supported by the
P80 console.
To export this file from your console:
1. Enter your code to view System Settings. To locate your
code, refer to Configuring the System Settings.
2. Insert a USB drive into the console.
3. On the Settings menu, touch System Settings.