l
Precor Connect Partner Website
Lubrication
Common metal parts Use only synthetic lubricants such as Mobile 1 Synthetic grease or
Super Lube with Teflon. Use of unapproved lubricants, cleaners, or solvents may void the bike
warranty.
Chain Lubricant: Use a high quality petroleum based chain lubricant such as
Tri-Flow Super-
ior Lubricant
or equivalent.
Cleaning
1. Wipe down equipment with recommended cleaning solution.
l General: 1 oz. mild soap to 30 oz. water.
l Consoles: a diluted solution of one part 91% Isopropyl alcohol to one part water.
CAUTION: Do not use acidic cleaners and do not spray directly onto the equipment
surfaces.
2. Rinse using a clean lint-free cloth and dampened with water only. Dry completely with
another clean lint-free cloth.
Page 5
1 Introduction
General Information
To Next Page
Loading...
