Vitality Series Selectorized Line Abdominal / Back Extension Assembly Guide: Assemble the Equipment 4
5. Attach the double foot pedals to the seat frame using:
2 – M10 x 20 mm hex head bolts
2 – 11 mm flat washers
Note: The foot pedal assembly can be tightened completely.
6. Attach the single foot pedals to the seat frame using:
2 - M10 x 75 mm hex head bolts
2 - 11 mm flat washers
Note: The bolts fit into threaded nuts on the seat frame, from the top down.
This foot pedal assembly can also be tightened completely.
Figure 3: Foot pedal assembly