Page 21For technical questions, please call 1-888-866-5797.ITEM 63080
SAFETYSETUPOPERATIONMAINTENANCE
Problem Possible Causes Probable Solutions
Product doesn’t
have power.
1. Product not plugged in properly.
2. Circuit Breaker tripped.
3. GFCI activated.
4. Product needs service.
1. Turn off and unplug the product, then
plug it back in again and turn on.
2. Turn off and unplug product. Reset Circuit
Breaker. Plug in product and turn on.
3. Turn off and unplug product. Test GFCI
receptacle. If functioning properly reset
GFCI, plug in product and turn on.
4. Have product repaired.
Product begins to
operate abnormally.
1. Problem with appliance.
2. Rated load capacity exceeded.
1. Immediately unplug appliance. Have
appliance repaired by a qualied
technician, or replace appliance.
2. Lower the number of items
plugged into the Generator to stay
within the rated capacity, or use
a more powerful generator.
Follow all safety precautions whenever diagnosing or servicing the equipment or engine.
Troubleshooting (continued)
To Next Page
Loading...
