S
susan00Jul 27, 2025
What to do if incoming water pressure is above 100 psi for Premier WP5-50 Water Filtration Systems?
- NnicholsteresaJul 28, 2025
If the incoming water pressure exceeds 100 psi, a water pressure regulator must be installed.
To Next PageTo Next PageWhat to do if incoming water pressure is above 100 psi for Premier WP5-50 Water Filtration Systems?
If the incoming water pressure exceeds 100 psi, a water pressure regulator must be installed.
Why reverse osmosis water should not be run through copper tube in Premier WP5-50?
Reverse osmosis water should not be run through copper tubing. The purity of the water will leach copper, which can cause an objectionable taste and may lead to pinhole formation in the copper tube.
What to do if incoming water pressure is under 40psi for Premier WP5-50 Water Filtration Systems?
If the incoming water pressure is under 40psi, you'll need to install a booster pump.
How to lengthen membrane life in Premier Water Filtration Systems?
To potentially extend the membrane life of your Premier Water Filtration System when operating with water hardness over 10 grains, consider adding a water softener.
General| Brand | Premier |
|---|---|
| Model | WP5-50 |
| Category | Water Filtration Systems |
| Language | English |
System tested and certified by WQA against NSF/ANSI Standards for contaminant reduction.
Essential safety and operational precautions to prevent product failure or damage.
Details each of the five stages of the reverse osmosis filtration system.
Highlights the necessity of filter changes and system upkeep for performance.
Water temperature, pressure, pH, TDS, and hardness limits for system operation.
List of essential tools required for the setup process.
Inventory of items provided in the RO system package for installation.
Itemized list and part numbers for all system components.
Instructions for installing the RO faucet, including drilling guidance.
Proper usage for connecting and disconnecting tubing.
Instructions for installing the Adapt-a-Valve to connect to water supply.
Securing the RO module and initial tube routing.
Connecting the drain line and installing the final polishing filter.
Connecting green, blue, and red water lines to the system.
Installing the last stage filter into the system.
Steps for bringing the system online, including flushing and tank filling.
Guidance for 6-month and annual filter changes.
Detailed steps for replacing the reverse osmosis membrane.
Checking tank pressure and procedures for extended non-use.
Diagnosing and resolving common operational issues.
System efficiency, contaminant reduction, and specifications.
Specific details on arsenic reduction capabilities and facts.
Log for tracking system service history and dates.
Terms, conditions, and exclusions of the product warranty.
