PRESONUS Eris E5 BT - Speaker and Subwoofer Connections; Front Panel Controls

2.1.4 Speaker Connections
Bare-wire connectors. This connection is used to send power and signal to the passive speaker. Be
sure to connect the positive and negative connections on your active speaker to the positive and neg-
ative connections, respectively, on the passive speaker (i.e. connect positive to positive and negative to
negative).
Subwoofer Out. This mono 1/4”TRS jack can be used to connect your subwoofer of choice. We recom-
mend the Eris Sub8.
2.2 Active Speaker Front Panel
Power Switch. This is the On/Off switch.
2.1.4 Speaker Connections 8