Installation Instructions
GAS CONNECTION
The appli a n c e ’ s gas inlet fitting is a 1/2” male threaded cylindrical gas type in acc o rd a n c e
w ith the ISO 7-1 standards. Make the connection using rigid pipe.
ELECTRICAL CONNECTION
This appliance must be connected by a competent person, using fixed wiring via a double
pole switched fused spur outlet, with a contact separation of at least 3mm in all poles.
We recommend that the appliance is connected by a qualified electrician who will comply
w ith I.E.E. re g u l a t i o n s .
The wires in the mains lead are coloured in acc o rdance with the fo llowing code: Green &
Ye llow = Earth, Blue = Neutral, Brown = Live .
7
Zepa GH60.qxd 19/9/07 8:55 Page 9
To Next Page
Loading...