+ (positive)
_ (negative)
Section 8 Change Meter Battery
If Meter does not turn on, Display is blank or shows
the following, the battery must be changed:
Change Battery.
1. Gather supplies.
• Meter
• 1
new AAA (1.5 volt)
alkaline battery
2. Remove Battery Door.
Turn Meter over, slide
Battery Compartment Door
up with thumb, and lift Door
up to remove.
3. Remove Old Battery.
Gently pull up ribbon that is
placed under battery or hold
Meter with one hand and
gently tap Meter with other
hand to loosen battery.
28
Ribbon
or
To Next Page