PREVOST X3-45 Commuter 2020 User Manual

5-48 Other Features
DOB 1300-1556 PA-1639 Operator's Manual 2020 X3-45 Commuter
3. Engage either keyed release shaft with the pump
handle.
4. Rotate the keyed release shaft ¼- turn (as
indicated on adjacent decal) while lifting stow lock
lever simultaneously.
FIGURE 12: DECAL
5. Grasp the top edge of the front rollstop with two
hands and pull firmly. The platform moves
smoothly after an initial resistance. Pull platform
straight out to the end of its travel.
CAUTION
Ensure that release shaft re-engages and locks when
platform is fully extended. If release shaft does not
engage, use manual pump handle and turn ¼- turn
(direction opposite to orientation shown on adjacent
decal) to re-engage release shaft.
6. Lift right handrail to vertical and push firmly down
into its socket. Repeat for left handrail.

PREVOST X3-45 Commuter 2020 Specifications

General

Transmission	Allison B500
Category	Buses
Manufacturer	Prevost
Model	X3-45 Commuter
Year	2020
GVWR	54, 000 lbs
Air Conditioning	Yes
Wheelchair Accessible	Yes
Engine	Detroit Diesel DD13
Length	45 ft
Width	102 in
Horsepower	450 hp