Prevue Pet Products Catville TOWNHOME Leopard User Manual

Model: #7235 (Leopard)
Instructions online at www.prevuepet.com
Made in China for Prevue Pet Products, Inc., 224 N Maplewood Ave, Chicago IL 60612 USA • www.prevuepet.com • 1 [800] 243-3624 • customerservice @ prevuepet.com7235—12/16—USL.1
Catville
™
TOWNHOME
read first REVIEW BEFORE ASSEMBLY
•
Designed for hand assembly.
No tools required.
•Check regularly to ensure all
components are connected.
• Place finished unit in an area
with room for cats to play and
i
nteract with all features.
F
or assistance or replacement
parts, please contact Prevue Pet
Products:
PHONE 312.243.3624
ONLINE w
ww.prevuepet.com
EMAIL customerservice@prevuepet.com
very helpful tips
• Loosely lay out all parts for each step.
• Slide tubes into fabric sleeves first—then add connectors.
• Use appropriate force when assembling connectors and tubes
to avoid unnecessary damage.
connectors
& parts
3 C
(6pcs)
4 C
(8pcs)
5 C
(6pcs)
6 C
(1pcs)
3 S
(4pcs)
2 S
(2pcs)
Foam footer pads
(9pcs)
A1
Sisal Post
(2pcs)
D1
Hideaway Den (1 pcs)
E2
Corner (1pcs)
M1
Square Plush Mat
(3pcs)
H
Hammock
(1pcs)
S1
Ramp (1pcs)
R1
Roof (1pcs)
A35
Long Tube
(37pcs)
D3
Hideaway Den (1pcs)
B28
Short Curve
(8pcs)
B40
Long Curve (4pcs)
3C
5C
4C
3 C
4 C
3 C
A 3 5
1
a
PARTS NAME QTY
3C 3-Way Corner ( 3 )
4 C 4-Way Corner ( 2 )
5C 5-Way Corner ( 1 )
A35 Long Tube ( 7 )
Foam Pads ( 6 )
To form the BASE (pt.1),
you will need these pieces:
FIRST, lay out the components in position.
NEXT, insert tubes into connectors to form the base.
Self-adhesive foam pads
(if used) should be placed
on the underside of all
connectors.

Prevue Pet Products Catville TOWNHOME Leopard Specifications

General

Brand	Prevue Pet Products
Model	Catville TOWNHOME Leopard
Category	Pet Care Product
Language	English

Summary

Catville Townhome Assembly

Forming the Base (Part 1)

Instructions for assembling the base of the pet home using specified connectors and tubes.

Starting the First Floor

Guidance on beginning the first floor assembly by adding vertical posts to the base structure.

Forming the First Floor Ramp

Steps to create and attach the ramp for the first floor, including securing fabric elements.

Forming the Base (Part 2)

Instructions to start the second part of the base, incorporating corner panels and fabric.

Finishing the Base (Part 2) with Hideaway

Steps to complete the base structure by adding a hideaway unit and securing fabric.

Starting the Second Floor

Guidance on adding vertical posts to the first floor to commence the second level of the structure.

Forming the Second Floor Hideaway

Instructions for constructing the second floor hideaway unit using specific connectors and tubes.

Forming the Rooftop

Steps to assemble and attach the rooftop structure, including curved tubes and fabric.

Forming the Hammock

Instructions for creating the hammock component by assembling a frame and attaching the fabric.

Adding Mats

Final step to attach plush mats to the assembled pet home structure.