18
www.pridemobility.com Sonic
TILLER CONSOLE
The tiller console houses all controls needed to drive your scooter, including the speed adjustment dial, key switch,
throttle control lever, battery condition meter, and horn button. See figure 6.
WARNING! Do not expose the tiller console to moisture. In the event that the tiller console
does become exposed to moisture, do not attempt to operate your scooter until the tiller
console has dried thoroughly.
IV. YOUR SCOOTER
Key Switch
n Insert the key into the key switch and turn it clockwise to power up (turn on) your scooter.
n Turn the key anticlockwise to power down (turn off) your scooter.
Although the key can be left in the key switch when the scooter is powered down, we recommend removing it to
prevent unauthorised use of your scooter.
WARNING! If the key is moved to the off position while your scooter is in motion, the
electronic brakes will engage and your scooter will come to an abrupt stop!
Throttle Control Lever
This lever allows you to control the forward speed and the reverse speed of your scooter up to the maximum
speed you preset with the speed adjustment dial.
n Place your right hand on the right handgrip and your left hand on the left handgrip.
n Use your right thumb to push the right side of the lever to disengage your scooters brakes and move forward.
n Release the lever and allow your scooter to come to a complete stop before pushing the other side of the lever
to move in reverse.
n When the throttle control lever is completely released, it automatically returns to the center stop position and
engages your scooters brakes.
Speed Adjustment Dial
This dial allows you to preselect and limit your scooters top speed.
n The image of the tortoise represents the slowest speed setting.
n The image of the hare represents the fastest speed setting.
Figure 6. Tiller Console
BATTERY CONDITION METER
HORN BUTTON
KEY
(INSERTED INTO
KEY SWITCH)
SPEED ADJUSTMENT
DIAL
THROTTLE CONTROL
LEVER (REVERSE)
THROTTLE CONTROL
LEVER (FORWARD)
To Next Page
Loading...
