Need help?Do you have a question about the Pride Go-Go ES8 and is the answer not in the manual?
General| Range | Up to 12.5 miles |
|---|---|
| Seat Width | 18 inches |
| Seat Depth | 16 inches |
| Ground Clearance | 2.5 inches |
| Drive Wheels | Rear |
| Tire Size Front | 8 inches |
| Tire Size Rear | 8 inches |
| Charger Type | Off-board |
| Weight Capacity | 300 lbs |
| Overall Width | 21 inches |
| Overall Height | 36 inches |
| Battery | 12V x 2 |
Standard Tiller Assembly for Go-Go ES 3-wheel models.
Standard Tiller Assembly for Go-Go ES 4-wheel models.
Tiller pivot assembly, including upper and lower components.
Front basket assembly, black plastic.
Steering mechanism components including stem and bearing kit.
Main front frame structure with axle assembly.
Front bumper assembly.
Seat post assembly.
Rear frame assembly.
Brake lever component.
Anti-tip wheel assembly.
Hardware for mounting the transaxle.
Complete assembly of transaxle, motor, and brake.
Motor and brake assembly.
Brake component of the drive assembly.
Transaxle assembly.
Top console assembly with speed pot knob and harness.
Bottom shroud for the console.
Throttle control components including potentiometer and lever.
Front-to-rear wiring harnesses for 3 and 4-wheel models.
Controller assembly, including all necessary harnesses and hardware.
Harness specifically for the horn.
Complete battery bag assembly with bag, batteries, and harness.
12 Amp Hour battery unit.
Front body shroud assembly, including circuit breaker.
15 Amp electronic circuit breaker.
Power harness for controller and travel systems.
Red colored battery cover assembly.
Blue colored battery cover assembly.
Rear body shroud assembly.
Front wheel assembly for 4-wheel models.
Complete rear wheel assembly.
Molded plastic black vinyl seat assembly with release lever.
Under seat storage assembly including the seat plate.
Under seat storage assembly without the seat plate.
Collection of various decals and labels for the scooter.
Complete package including manual, warranty, tools, and inserts.
Coated key for the scooter.
Deluxe key with a molded plastic knob.
Cotterless detent pin with ring.
To Next Page
