Primare CD31 - Remote Control

5
Programming the CD31
This chapter explains how to use the more advanced features of the CD31 Compact Disc Player which you can access from the
remote control.
Changing the front panel
display
You can change the front panel time display to
show elapsed time for the current track, remaining
time for the current track, or remaining time for the
entire disc.
To change the time display
•
Press the DISP button on the remote control.
The display switches between the following four
options:
Elapsed time for the current track
11 0:44
Remaining time for the current track
1 1:04 RT
Elapsed time for the entire disc
ALL 8:10
Remaining time for the entire disc
ALL 18:14 RT
To dim the front panel display
•
Press the DIM button on the remote control.
There are three levels of illumination and blank.
•
Press the DIM button again to restore the
normal display.
Repeating playback
To repeat the current track
•
Press the H button on the front panel, or the
Repeat button on the remote control.
The front panel shows REPEAT TRK:
1 R_TRK
To repeat the entire disc
•
Press the H button on the front panel, or the
Repeat button on the remote control twice.
The front panel shows REPEAT DSC:
1 R_DSC
To repeat a specific section of a disc
(Repeat A-B)
During this operation the disc has to be running.
•
Press the TOP button on the remote control at
the start of the section you want to repeat.
The front panel display shows REPEAT A:
1 R_A
•
Press the TOP button again at the end of the
section you want to repeat.
The front panel display shows AB:
1 R_AB
The compact disc player will then automatically
return to the start of the section you have marked
and play back repeatedly.
To turn off repeat
•
Press the TOP button again.
The REPEAT AB symbol in the front panel display
will be cleared.
Programming a selection
of tracks
The CD31 Compact Disc Player allows you to
program a selection of tracks on the current disc.
You can then play just the tracks you have selected.
You can step through your selection with the [ or
] buttons.
To program a selection of tracks
•
Press the MEM button on the remote control
while the disc is stopped.
The front panel display shows PGM SEQ.
•
Select with buttons 1-9 and, if required, the
+10
button.
As you select tracks the front panel display shows
the number of the track you are programming
and the number of the step in the program, the
duration of the track.
10 P-01
To play the selection you have
programmed
•
Press the >/= button on the remote control.
The currently played track always flashes in the
tracklist on the front panel display.
•
Press the */å button on the remote control to
stop the CD.
•
Press the MEM button for a new selection or
press the MEM button twice and the compact
disc player reverts to normal playing mode.
Playing a random
selection of tracks
•
Press the MODE button on the remote control.
The front panel display will show RND SEQ:
1RND SEQ
•
Press the >/= button on the remote control.
The compact disc player selects random tracks from
your CD.
•
Press the */å button on the remote control to
stop the CD.
•
Press the MODE button on the remote control
and the compact disc player will revert to
normal playing mode.