Need help?Do you have a question about the Primayer PrimeLog and is the answer not in the manual?
Overview of the PrimeLog datalogger family and its applications in the Water Industry.
Details standard and PSTN logger models, channel counts, and accuracy specifications.
Highlights key physical and design features of PrimeLog dataloggers, including submersible rating.
Describes logging capabilities like measurement range, modes, and data readback options.
Explains how PrimeLog dataloggers record flow and pressure data from various meter types.
Details special features like analogue input compatibility and internal calibration data storage.
General overview of PrimeLog models, input channels, powering options, and connectivity.
Describes the auxiliary battery unit for powering digital sensors with high current demands.
Explains an adaptor for continuous battery connection during communication periods.
Details the importance of proper sealing of connectors for environmental performance and data integrity.
Explains connector polarization to prevent incorrect input connections.
Identifies and describes the various input connectors on PrimeLog loggers.
Details the connection and powering of digital sensors to the logger.
Describes the internal pressure transducer, its range, accuracy, and calibration.
Explains the types of analogue inputs (voltage/current) and their specifications.
Describes the cable used for PC or Psion Workabout communication.
Details the connection for the external PSTN modem.
Explains how to set up the logger using support software or a Psion Workabout.
Describes routine operation, including data downloading without interrupting logging.
Details interfacing with Quadrina insertion meters for velocity measurement.
Describes Quadrina probe sizes, flow directionality, and electronic interfaces.
Explains volumetric flow calculation from velocity, including blockage factors.
Details probe calibration procedures and the use of calibration certificates.
Lists information required for configuring loggers with Quadrina probes.
Covers interfacing with other flowmeter sensors and their power requirements.
Provides scaling tables for domestic, Helix, and master meters from various manufacturers.
Contains specific scaling data for different types and sizes of Kent meters.
Provides scaling tables for various models and sizes of Schlumberger meters.
Lists scaling data for different types and sizes of Socam meters.
Offers clarifications and notes related to meter scaling tables, covering Kent, Schlumberger, and Socam meters.
Details technical specifications of PrimeLog loggers, including inputs, channels, and compatibility.
Outlines airfreight regulations for shipping PrimeLogs, particularly concerning batteries.
Provides UK-specific statutory notices and warnings for the Primayer modem card.
General| Category | Data Loggers |
|---|---|
| Model | PrimeLog |
| Manufacturer | Primayer |
| Enclosure | Robust, Waterproof |
| Protection Rating | IP68 |
| Operating Temperature Range | -20°C to +60°C |
| Measurement Parameters | Pressure |
| Data Storage | Internal |
| Power Supply | Lithium battery |
| Communication | USB |
To Next Page
