Appendices
PrimeLog User Manual
16
2.1.4.3 Socam meters:
*The K510 pulse unit is factory fitted and cannot be removed. The FCAL is determined at the
factory and the above table shows the values available. The individual meter should be
checked before selecting the appropriate FCAL.
The K505R is a removable reedswitch with only two FCAL values available.
** It is recommended that the K10 position on the index head be used at all times when using
the R02.2 and RD022 reedswitch as this will give a higher resolution. The two Opto devices
use K=1000 as a pulsed output value.
To Next Page
