2
SAFETY
WARNING
Welding and cutting is dangerous to the operator, people in or near the working
and surrounding areas, if the equipment is not operated correctly. Therefore the
performance of welding/cutting must only be under the strict and comprehensive
observance of all relevant safety regulations.
Symbol Description
Electric Shock: Maybe fetal
Avoid all contact with live components of the welding circuit, Electrodes and Wires
with bare bands. Wear dry gloves before start welding task.
Wires with bare bands Keep operator insurance from welding metal and welding pieces.
Smoke and gas generated while welding or cutting
Harmful to health of people
Keep head distance away from gas.
Avoid breathing the smoke and gas of welding or cutting.
Keep the working area in good ventilation.
Fire Hazard
Welding sparks, Power cable leakage both can cause the re.
Please do not welding in inammable, it’s can cause explode.
Sparks may cause re, Remove ammable material from the work place.
Keep re extinguisher nearby and have a trained re person ready to use it.
ARC light-emission: Harmful to the eyes & skin of people
Wear a welding helmet, Anti-radiation glass and work clothes while the
welding Operation is performed.
Keep working area in ventilation.
CYLINDER may explode if damaged.
Always keep cylinders in an upright position securely chained to an
Undercarriage or xed support.
Never allow the electrode, electrode holder or any other electrically “hot”
parts to touch a cylinder.
Keep your face and head away from the cylinder valve outlet when it to
be opening.
Engine fan can hurt the hands
Do not put your hands near the engine fan.
Do not attempt to override the governor or idler by pushing on the throttle
Control rods while the engine is running.
ELECTRIC SHOCK can kill.
Insulate yourself from work and ground using dry insulation. Make certain
the insulation is large enough to cover your full area of physical.
Ground the work or metal to be welded to a good electrical ground.
Never dip the electrode in water for cooling.
Turn o input power using the disconnect switch at the fuse box before
working on the equipment.
Install equipment in accordance with electric standard code.
To Next Page
Loading...
