Primus ECM Series - Page 20

ECM-SERIES 18
User’ Guide
1.
Press UP + DOWN and hold to order or cancel
operation.
1.
Press SET+UP and hold until display show "HI".
2.
Display will show maximum temperature.
3.
Press SET to exist or wait for 5 Second.
4.
Press SET+DOWN and hold until display show "LO".
5.
Display will show lowest temperature.
6.
Press SET to exist or wait for 5 Second.
1.
Press SET and hold while show temperature max or
lowest value.
2.
Display will show "RST" to show that the value has been
deleted successfully.
1.
Press DEF + SET and hold until display show "LOC"
1.
Press DEF+SET and hold until display show "ULO"
1. Press SET and hold until display show parameter
(C or F will flashing)
2.
Press UP or Down for choose requested parameter.
3.
Press SET for look to parameter.
4.
Press UP or Down to change parameter.
5.
Press SET to save parameter.
*Press SET and hold at parameter page or wait for
30 second for exist.
Continue Mode
Maximum Temperature Mode
Lowest Temperature Mode
Delete Maximum or Lowest
Temperature
How to lock key
How to unlock key
How to change paragraph
1.
Press SET and hold until display show parameter (Menu 1).
2.
Press SET + UP and hold until display show "M 2".
3.
Display will show parameter in Menu 2.
How to enter to Menu 2
1. Press SET+DOWN and hold at required parameter in Menu 2
* See if the parameters were set in menu
1. it will have "." shows in menu 2.
* See if the parameters were set in menu
2. it does not have "." shows in menu 2.
How to move parameter
between Menu 1 and 2
How to press the keypad