35
2. After installing the SIM card into the 3G NIC, install the 3G NIC to the USB OTG
cable and then connect to the device;
3. After connecting to the 3G NIC, tap → Wireless and network → More →
Mobile network to perform 3G Internet access settings.
4. Turn on the mobile network and select Enabled data flow → Data roaming,
then select APN, enter and select Menu key: create new APN for Internet access.
For China Unicom 3G Internet access, please set as follows:
Name: 3GWAP / APN: 3gnet / Proxy: Not set/ Port: 80 / Username: Not set/
Password: Not set / Server: Not set / MMSC: Not set / MMC proxy: Not set /
MMC port: Not set / MCC: 460 / MNC: 01/ Authentication type: Not set / APN
type: Not set / APN type: Not set
Connect to 3G network after setting; the symbol appears on the screen after
connecting to 3G network.
If the symbol is grey, it is scanning the network; blue symbol indicates that the
network is connected, and the symbol indicates data transmitting.
To Next Page
Loading...
General