Need help?Do you have a question about the Printronix ThermaLine Series and is the answer not in the manual?
Describes how the IGP/PGL emulation functions.
Describes the different operational states of the IGP/PGL.
Guides on setting printer configuration parameters via the control panel.
Illustrates the menu structure for IGP/PGL configuration.
Enables host control of PSA printer resources common to all emulations.
Lists valid SETUP parameters and value ranges by category.
Identifies a command directed to IGP/PGL for specific functions.
Methods for printing alphanumeric data: fixed, overlay, and dynamic.
Prints forms created in Create Form mode with variable data.
Explains execution of dynamic alphanumeric and bar code fields.
Step-by-step guide to create and execute a complete form.
Explains how coded error messages assist in debugging programs.
Details errors related to the HORZ command parameters.
Details errors related to the VERT command parameters.
Details errors related to the BOX command parameters.
Details errors related to the CORNER command parameters.
Details errors related to the ALPHA command parameters.
Details errors specific to bar code commands.
General| Print Method | Thermal Transfer |
|---|---|
| Print Technology | Direct Thermal/Thermal Transfer |
| Resolution | 203 dpi, 300 dpi |
| Maximum Print Width | 104 mm |
| Print Speed | 10 ips (254 mm/sec) |
| Communication Ports | Serial, Parallel, USB, Ethernet |
| Connectivity | Serial, Parallel, USB, Ethernet |
| Media Handling | Fan-Fold, Tag |
| Memory | 8 MB |
| Supported Barcode Types | Code 39, Code 128, UPC-A, UPC-E, EAN-8, EAN-13, Interleaved 2 of 5, Codabar, Postnet, PDF417, Data Matrix, QR Code |
| Operating Temperature | 40°F to 104°F (5°C to 40°C) |
| Power Requirements | 100-240VAC, 50-60Hz |
To Next Page
