11
11. Insert the wires into the Right Handrail (64)
through the indicated hole as you set the con-
sole assembly on the Left and Right Uprights
(66, 76).
Attach the console assembly with ten #8 x 3/4"
Screws (4);
Firmly tighten the six 3/8" x 3 1/4"
Screws (2).
4
4
4
4
4
64
Wires
Wires
76
Hole
66
Console Assembly
10. With the help of a second person, hold the con-
sole assembly near the Right Handrail (64).
Connect the Upright
Wire (63) to the console wire.
If they do not, turn one connector and try
again.-
Then, remove the wire tie from
the Upright Wire.
Connect the console ground wire to the ground
wire on the Console Crossbar (61).
64
10
63
61
Ground
Wires
Console
Assembly
Console
Wire
63
Wire
Tie
Console
Wire
To Next Page
Loading...
