13. Remove the 5/16" Nut (80) and the 5/16" x 1 1/2"
Bolt (78) from the bracket on the Base (74).
Next orient the Storage Latch (68) as shown.
Attach the lower end of the Storage Latch (68)
to the bracket on the Base (74) with the 5/16" x
1 1/2" Bolt (78) and the 5/16" Nut (80) as shown.
Then, raise the Storage Latch (68) to a vertical
position, and remove the tie (E).
74
78
80
E
13
12. Raise the Frame (38) to the upright position.
Attach the Latch Crossbar to the brackets on the
Frame (38) with two 1/4" x 1 3/4" Screws (77).
77
67
38
77
12
68
Brackets
To Next Page
Loading...
