16. If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. To
avoid damage to the console, keep the treadmill out of direct sunlight. Keep the included hex keys in a secure
place; one of the hex keys is used to adjust the walking belt (see pages 25 and 26). Note: Extra hardware
may be included.
14. Remove the 5/16" Nut (80) and the 5/16" x 1 3/4"
Bolt (79) from the bracket on the Latch Crossbar
(67).
Align the upper end of the Storage Latch (68)
with the bracket on the Latch Crossbar (67), and
insert the 5/16" x 1 3/4" Bolt (79) through the
bracket and the Storage Latch.
Next, tighten the 5/16" Nut (80) onto the 5/16" x
1 3/4" Bolt (79).
Then, lower the Frame (38) (see HOW TO
LOWER THE TREADMILL FOR USE on
page 23).
67
79
38
80
68
14
F
15. Attach the Tablet Holder (92) with four #8 x 1/2"
Machine Screws (91);
15
91
92
91
To Next Page
Loading...
