28
Note: If a passcode is enabled, the console will
regularly ask for you to enter the passcode. The
console will remain locked until the correct pass-
code is entered. IMPORTANT: If you forget your
passcode, enter the following master passcode
to unlock the console: 1985.
10. Enable or disable street view.
During some workouts, the screen may show a
map. To enable or disable the street view feature of
the maps, first touch the Street View button. Next,
touch the Enable checkbox or the Disable check-
box. Then, touch the back button on the screen.
11. Select a time zone.
To select a time zone, touch the Timezone button
and select the desired time zone. Then, touch the
back button on the screen.
12. Select an update time.
To select a time for automatic console updates,
touch the Update Time button and select the
desired time. Then, touch the back button on the
screen.
When you select an update time, you must also
enable automatic console updates (see step 4).
IMPORTANT: You must still unplug the power
cord after using your trainer. Set the update
time for a time when you normally use your
trainer and will be available to unplug the
power cord after an update.
13. Select the unit of measurement.
Touch the US/Metric button to view the selected
unit of measurement. Next, touch the checkbox for
the desired unit of measurement. Then, touch the
back button on the screen.
14. Exit the equipment settings mode.
To exit the equipment settings mode, press the
back button on the console or touch the back but-
ton on the screen.
To Next Page
Loading...
Need help?
General
