Pro-Form PFEL04915.0 - Step 7: Upright Cover Attachment; Step 8: Handlebar Installation

9
7. Identify the Right Upright Cover (17) and hold it
against the right side of the Upright (3).
Attach the Right Upright Cover (17) with two
M4 x 16mm Round Head Screws (101).
Attach the Left Upright Cover (39) in the
same way.
7
17
39
3
101
101
8. Identify the Right and Left Handlebars (119, 120)
and orient them as shown.
Tip: Avoid pinching the Pulse Wires (118).
Attach the Right and Left Handlebars (119, 120)
to the Upright (3) with two M8 x 80mm Bolts
(116) and two M8 Jam Nuts (79).
79
118
118
119
120
116
116
8
Avoid pinching
the wires
3