To Next PageTo Next PageWhat to do if pedals slip on Pro-Form Exercise Bike?
If you feel the pedals slipping while pedaling on your Pro-Form Exercise Bike, it might be because the drive belt needs adjustment. To resolve this, tighten the M10 x 60mm Screw (65) until the Drive Belt is tight.
Why is the Pro-Form PFEX39420-INT.0 Exercise Bike console display dim?
If the console display on your Pro-Form Exercise Bike becomes dim, it's likely due to low batteries. Replace the batteries to resolve this issue; refer to assembly step 14 on page 13 for instructions.
How to fix Pro-Form PFEX39420-INT.0 tablet holder that won't stay in place?
To fix a tablet holder that doesn't stay in place on your Pro-Form Exercise Bike, rotate the tablet holder backward and tighten the locknut (A) inside the bracket mount until the tablet holder stays in place.
General| Resistance Type | Magnetic |
|---|---|
| Resistance Levels | 16 |
| Display Type | LCD |
| Maximum User Weight | 115 kg |
| Weighted Flywheel | 7 kg |
| Type | Upright |
| Weight Capacity (kg) | 115 kg |
| Heart Rate Monitoring | Hand pulse sensors |
How to change resistance and stop the flywheel.
Steps to operate the console in manual mode.
Guide to connect a tablet using the iFit app via Bluetooth.
Steps to connect a Bluetooth Smart heart rate monitor.
Solutions for common console display and function issues.
Procedure to adjust the reed switch for correct console feedback.
