12
11
11
11
89
12
11. Orient the Console Housing (86) and the
Console Deck (89) as shown.
Attach the Console Housing (86) to the Console
Deck (89) with four M4 x 16mm Screws (11);
start all the Screws, and then tighten them.
59
5
89
86
12. While a second person holds the Console Deck
(89) near the Console Mount (5), connect the
Console Wire (J) to the Extension Wire (12).
Next, press the Wire Protector (59) around the
Console Wire (J) in the location shown.
Then, insert the Wires (J, 12) into the Console
Mount (5), and press the Wire Protector (59) into
the Console Mount.
J
12
To Next Page
Loading...
