14
11. IMPORTANT: To avoid damaging the
Crossbar (79), do not use power tools and do
not overtighten the #10 x 3/4" Screws (2).
Orient the Crossbar (79) as shown. Attach the
Crossbar to the Left and Right Handrails (82, 83)
with four #10 x 3/4" Screws (2) and four 1/4" Star
Washers (12). Start all four Screws, and then
tighten them.
11
79
2
83
82
12
12
2
10. Set the console assembly face down on a soft
surface to avoid scratching the console assem-
bly. Remove the two #8 x 3/4" Screws (1). Next,
lift off the Crossbar (79).
10
79
Console
Assembly
1
To Next Page