Pro-Ject Audio Systems T1 - Page 9

© Pro-Ject Audio Systems · Pro-Ject T1 / T1 Phono SB · Revision 2019.05.27
9
Take care to connect the left and right channels correctly. The right channel is usually marked red, the left
channel black or white. The earthing wire of the tonearm lead should be connected to the earth terminal on
your amplifier (if provided).
Technical specifications Pro-Ject T1 Phono SB / Pro-Ject 8.6
Nominal speeds
33/45 r.p.m.
Speed variance
33: ±0.70% 45: ±0.60%
Wow and flutter
33: ±0.25% 45: ±0.23%
Signal to noise
-65dB
Effective tonearm mass
8.0g
Effective tonearm length
8.6" (218,5mm)
Overhang
22,0mm
Power consumption
4,5W
Outboard power supply
15V/800mA DC, suitable for your country's mains supply
Dimensions (W x H x D)
420 x 112 x 330mm
Weight
5,0kg
Dimensions packaging (W x H x D)
488 x 235 x 393mm
Weight incl. packaging
7,0kg
Technical specifications MM-Cartridge Ortofon OM 5E
Frequency range
20-25.000Hz
Channel separation
22dB/1kHz
Output voltage
4mV
Recommended load impedance
47kohms/amplifier connection – MM-input
Compliance/stylus type
20µm/mN – elliptical
Recommended tracking force
17,5mN
Weight
5g
Technical specifications MM phono pre-amplifier
Gain
34dB
Output voltage typically
200mV/1kHz at 5mV/1kHz input
Input impedance
47kohms/100pF
Noise floor
-68dB
RIAA-equalisation curve accuracy
20Hz-20kHz / max. 0,5dB