PRO-SYS JetFloss - Troubleshooting; Unit Not Operating; Water Leaks: Wand and Tip

20 pages

To Next Page

To Previous Page

Troubleshooting

PROBLEM

Unit will not operate.

POSSIBLECAUSE

Unit is not connected to power.

SOLUTION

Connect the plug to AC power outlet.

PROBLEM

Water leaks between wand and tip.

POSSIBLECAUSE

Tip is not fully inserted.

SOLUTION

Remove tip, then reinsert until you feel a slight click.

PROBLEM

Visible leaks, tears, or cracking on tips.

POSSIBLECAUSE

Tip is damaged.

SOLUTION

Replace with new tip by visiting PRO-SYS.com.