6
To get the most from your JetFloss, please take a moment to
thoroughly read the entire Quick Start Guide & User Manual and
Personalizing Your JetFloss Guide booklets.
1. Remove the unit and accessories from all packaging.
2. If desired, prior to initial use, remove the water reservoir,
tip storage, and tips from the base. Wash the water reservoir
thoroughly with mild soap and warm water.
Allow to dry thoroughly. Reassemble.
3. Connect the power cord to AC outlet.
4. Fill the reservoir with water.
5. Insert desired tip into wand.
6. Direct jet tip into sink. Turn power on.
7. Place the tip into mouth and clean desired areas. Use the
intensity control to adjust water jet pressure as needed.
8. Turn power off. Empty any remaining water in reservoir.
Disconnect power cord from AC outlet.
9. Regularly clean reservoir and used tips by washing with mild
soap and warm water and allowing them to dry completely.
IMPORTANT: Never expose base to excess moisture or submerge
in water. See complete safety information on pages 16 and 17.
Quick Start Guide
Quick Start Guide
To Next Page
Loading...