PRO-SYS JetFloss - Using The 360° Wand

9
ATTACHINGANDREMOVINGTIPS
Hold the wand firmly in one hand. Using your other hand, insert
tip into wand with gentle pressure until you feel a slight click and
there is no visual gap between the wand and the 360
º
control
ring. To remove tip, press the tip eject button and pull tip up and
away from the wand.
ADJUSTINGWATERJETPRESSURE
Slide the wand’s water intensity control up to increase pressure
and down to decrease. Choose what is most comfortable or what
your dentist recommends for your oral condition.
DIRECTINGTHEWATERJET
Use the 360
º
control ring, located at the top of the wand where
the tip attaches, to change the direction of the water jet without
rotating the entire wand.
Using The 360
º
Wand
Using The 360
º
Wand