PRO-TEK WI Series - User Manual

Questions and Answers

J
jacobsontravisAug 11, 2025
Why PRO-TEK Measuring Instruments scale not operate?
- A
  Ashley HoganAug 11, 2025
  The PRO-TEK Measuring Instruments scale might not be operating due to several reasons: * **No electric current:** Use a multimeter to check the current outlets. * **AC/DC power supply cable has a false contact:** Check the AC/DC power supply terminals. If possible, test with another AC/DC power supply. * **Low battery:** Connect the AC/DC power supply. If the scale operates, replace the battery.
U
umcdowellAug 18, 2025
Why la báscula PRO-TEK WI no enciende?
- M
  Monica CortezAug 18, 2025
  La báscula PRO-TEK Measuring Instruments puede no encender por las siguientes razones: * **No hay electricidad:** Cheque la salidas con un multímetro. * **El cable AC/DC tiene un falso contacto:** Cheque las terminales de cable, de ser posible utilicé otro adaptador. * **Batería baja:** Conecte el eliminador de baterías, si la báscula enciende remplace la batería.
R
Ryan GonzalezAug 23, 2025
What to do if PRO-TEK WI scale shows different weights with the same weight?
- J
  Jennifer JohnsonAug 25, 2025
  If your PRO-TEK Measuring Instruments scale displays different weights for the same item, it could be due to material obstructing the correct movement or a wrongly connected load cell. Check for any materials under the platform, remove them, and check the operation again. Also, check for a false contact or ensure the color code configuration of the load cell is correct.
K
Kelly JacksonAug 29, 2025
What to do if la báscula PRO-TEK Measuring Instruments muestra diferentes lecturas con el mismo peso?
- S
  Stephen JohnsonAug 29, 2025
  Si su báscula PRO-TEK Measuring Instruments muestra diferentes lecturas con el mismo peso, podría ser porque hay material obstruyendo el correcto funcionamiento o la celda de carga está mal conectada. Verifique si existe algún material debajo del plato o plataforma, remuévalo y pese nuevamente. Cheque si existe un falso contacto.
W
williamwatersSep 4, 2025
How to fix la bascula PRO-TEK WI no despliega el peso en la PC?
- C
  Crystal ThomasSep 4, 2025
  If your PRO-TEK Measuring Instruments scale is not displaying the weight on your PC, verify if the cable is correctly connected to both the PC port and the scale. Also, configure the software according to the manual.

PRO-TEK WI Series Specifications

General

Brand	PRO-TEK
Model	WI Series
Category	Measuring Instruments
Language	English

PRO-TEK WI Series - User Manual

Table of Contents

Questions and Answers

PRO-TEK WI Series Specifications